Author: D’Ambros, A.
Paper Title Page
WEPTEV008 VSR Demo Cold String: Recent Developments and Manufacturing Status 647
 
  • N.W. Wunderer, V. Dürr, A. Frahm, H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples-Milne, A.V. Tsakanian, A.V. Vélez
    HZB, Berlin, Germany
  • M. Bonezzi, A. D’Ambros, R. Paparella
    INFN/LASA, Segrate (MI), Italy
  • J. Guo, J. Henry, R.A. Rimmer
    JLab, Newport News, Virginia, USA
  • J. Knobloch
    University of Siegen, Siegen, Germany
  • A.V. Vélez
    Technical University Dortmund, Dortmund, Germany
 
  The BESSY VSR project aims to demonstrate the possibility to simultaneously run both long (15ps) and short bunches (1.7ps) within BESSY II storage ring. To achieve this, a new SRF cavity system with higher harmonic cavities (3 and 3.5 harm.) needs to be installed. The combined cavity SRF beating allows for stable bunch shortening for half of the buckets while standard lengths remaining for the other half. These SRF cavities will be equipped with waveguide-connected HOM absorbers and will be controlled with a blade tuner plus piezos. To demonstrate the feasibility of this complex system the VSR DEMO cold string consists of two 1.5 GHz cavities, each featuring five waveguides and a higher power coupler, plus all interconnecting elements coupled to the beam vacuum. For most of these components the fundamental development work is completed and has been reported in the past. This paper summarizes recent enhancements, component detailing and manufacturing status. The key cold string components such as cavities, higher power couplers and blade tuners have already entered the manufacturing phase. All other cold string components will be ready for purchase at the latest beginning of 2022.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-WEPTEV008  
About • Received ※ 18 June 2021 — Revised ※ 09 August 2021 — Accepted ※ 22 November 2021 — Issue date ※ 05 January 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPCAV005 Status of the INFN-LASA Contribution to the PIP-II Linac 787
 
  • R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, D. Cardelli, A. D’Ambros, G. Fornasier, A.T. Grimaldi, L. Monaco, D. Sertore
    INFN/LASA, Segrate (MI), Italy
  • C. Pagani
    Università degli Studi di Milano & INFN, Segrate, Italy
 
  The international effort for the PIP-II project at Fermilab has been joined by INFN with its planned contribution to the PIP-II proton linac in the low-beta section. INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, 36 plus spares resonators with 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry to reach the unprecedented performances required by PIP-II, qualified through vertical cold test at state-of-the art infrastructures and delivered as ready for the linac at the string assembly site. The status of INFN contribution to PIP-II, the development of infrastructures and prototypes as well as the ongoing activities toward the start of series production are summarized in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THPCAV005  
About • Received ※ 21 June 2021 — Accepted ※ 09 October 2021 — Issue date; ※ 08 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPCAV012 ESS Medium Beta Cavities at INFN LASA 815
 
  • D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, D. Cardelli, A. D’Ambros, A.T. Grimaldi, L. Monaco, R. Paparella, G.M. Zaggia
    INFN/LASA, Segrate (MI), Italy
  • C. Pagani
    Università degli Studi di Milano & INFN, Segrate, Italy
 
  INFN Milano - LASA contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. All the cavities have been mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold at DESY. We present the result of the cavities already qualified and delivered to CEA, discussing the lessons learnt so far. For remaining cavities, we discuss the actions taken and the plans foreseen to recover them to full specifications.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THPCAV012  
About • Received ※ 21 June 2021 — Revised ※ 01 September 2021 — Accepted ※ 10 October 2021 — Issue date ※ 23 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPCAV014 Development of High-Q Treatments for PIP-II Prototype Cavities at LASA-INFN 820
 
  • M. Bertucci, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, C. Pagani, R. Paparella, D. Sertore
    INFN/LASA, Segrate (MI), Italy
  • A. Gresele, A. Torri
    Ettore Zanon S.p.A., Nuclear Division, Schio, Italy
  • C. Pagani
    Università degli Studi di Milano & INFN, Segrate, Italy
  • M. Rizzi
    Ettore Zanon S.p.A., Schio, Italy
 
  INFN-LASA is currently involved in the production of PIP-II low-beta cavity prototypes. The main challenge of this activity is to develop a state-of-the art surface treatment recipe on such cavity geometry, to achieve the high-Q target required for cavity operation in the linac. This paper reports the status of cavity treatments development and the first cold test results of a single-cell cavity. This cavity has undergone a baseline treatment based on Electropolishing as bulk removal step. Being this test successful, a strategy for pushing the cavities towards higher performances is here proposed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THPCAV014  
About • Received ※ 21 June 2021 — Accepted ※ 01 March 2022 — Issue date; ※ 01 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)