Author: Howell, M.P.
Paper Title Page
MOPCAV005 Status of SNS Proton Power Upgrade SRF Cavities Production Qualification 265
 
  • P. Dhakal, E. Daly, G.K. Davis, J.F. Fischer, D. Forehand, N.A. Huque, A.L.A. Mitchell, P.D. Owen
    JLab, Newport News, Virginia, USA
  • M.P. Howell, S.-H. Kim, J.D. Mammosser
    ORNL, Oak Ridge, Tennessee, USA
 
  The Proton Power Upgrade project at Oak Ridge National Lab’s Spallation Neutron Source (SNS PPU) currently being constructed will double the proton beam power from 1.4 to 2.8 MW by adding 7 additional cryomodules, each contains four six-cell high beta (\beta = 0.81) superconducting radio frequency cavities. The cavities were built by Research Instruments, Germany, with all the cavity processing done at the vendor site, including electropolishing as the final active chemistry step. All 28 cavities needed for 7 cryomodules were delivered to Jefferson Lab, ready to be tested. The cryogenic RF qualifications and helium vessel welding were done at Jefferson Lab. The performance largely exceed the requirements, and greatly exceeded the performance of the original SNS cavity production series. Here, we present the summary of RF test on production cavities to this date.
This manuscript has been authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
 
poster icon Poster MOPCAV005 [1.061 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-MOPCAV005  
About • Received ※ 19 June 2021 — Revised ※ 10 July 2021 — Accepted ※ 12 March 2022 — Issue date ※ 06 April 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPCAV008 Results From the Proton Power Upgrade Project Cavity Quality Assurance Plan 801
 
  • J.D. Mammosser, E. Robertson
    ORNL RAD, Oak Ridge, Tennessee, USA
  • R. Afanador, M.S. Champion, M.N. Greenwood, M.P. Howell, S.-H. Kim, S.E. Stewart, D.J. Vandygriff
    ORNL, Oak Ridge, Tennessee, USA
  • A. Bitter, K.B. Bolz, A. Navitski, L. Zweibaeumer
    RI Research Instruments GmbH, Bergisch Gladbach, Germany
  • E. Daly, G.K. Davis, P. Dhakal, D. Forehand, K. Macha, C.E. Reece, K.M. Wilson
    JLab, Newport News, Virginia, USA
 
  Funding: UT-Battelle, LLC, under contract DE-AC05-00OR22725 with the US Department of Energy (DOE)
The Proton Power Upgrade (PPU) Project at Oak Ridge National Lab’s Spallation Neutron Source (SNS) is currently under construction. The project will double the beam power from 1.4 to 2.8 MW. This is accomplished by increasing the beam current and adding seven new Superconducting Radio Frequency (SRF) cryomodules. Each new cryomodule will contain four six-cell, beta 0.81, PPU style cavities. A quality assurance plan was developed and implemented for the procurement of 32 PPU cavities. As part of this plan, reference cavities were qualified and sent to Research Instruments Co. for the development and verification of process steps. Here we present the results from this plan to date.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THPCAV008  
About • Received ※ 04 June 2021 — Accepted ※ 06 September 2021 — Issue date; ※ 16 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)