Author: Konomi, T.
Paper Title Page
SUPCAV008 Design and Construction of Nb3Sn Vapor Diffusion Coating System at KEK 23
 
  • K. Takahashi, T. Okada
    Sokendai, Ibaraki, Japan
  • H. Ito, E. Kako, T. Konomi, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
 
  Vapor diffusion Nb3Sn coating system was developed at KEK. At most 1.3GHz 3-cell cavity can be coat with the coating system. The coating system consists of a coating chamber made of Nb, a vacuum furnace for heating the Nb chamber, and a heating device of Tin in the crucible. The Nb chamber vacuum and the furnace vacuum are isolated to prevent contamination from the furnace. There is a heating device for increasing Tin vapor pressure. In this presentation, the design and construction of the coating system are reported.  
poster icon Poster SUPCAV008 [0.981 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPCAV008  
About • Received ※ 21 June 2021 — Accepted ※ 18 November 2021 — Issue date; ※ 11 April 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
SUPCAV009 First Nb3Sn Coating and Cavity Performance Result at KEK 27
 
  • K. Takahashi, T. Okada
    Sokendai, Ibaraki, Japan
  • H. Ito, E. Kako, T. Konomi, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
 
  At KEK, Nb3Sn vapor diffusion R&D for High-Q has just started. We have performed Nb3Sn coating on niobium samples and characterized these samples. We optimized the cavity coating parameter from the result of characterized samples. After optimizing the parameter, we have performed Nb3Sn coating on a TESLA-like single-cell Nb cavity and measured cavity performance in vertical tests. This presentation presents the result of the cavity coating and performance results.  
poster icon Poster SUPCAV009 [1.477 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPCAV009  
About • Received ※ 21 June 2021 — Accepted ※ 18 March 2022 — Issue date; ※ 16 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPCAV006 High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities 268
 
  • R. Katayama, A. Araki, H. Ito, E. Kako, T. Konomi, S. Michizono, M. Omet, K. Umemori
    KEK, Ibaraki, Japan
 
  We will report on the current progress of High-Q/High-G R&D using three 1.3 GHz 9-cell TESLA shape niobium superconducting cavities at the High Energy Accelerator Research Organization (KEK). These cavities are made of bulk niobium of fine grain material with RRR >300 and have been annealed at 900 degrees for 3 hours. The cavity performances were evaluated at the Superconducting RF Test Facility at KEK (KEK-STF) after 2-step bake (70-75°C 4 h + 120°C 48 h), electropolishing at low temperature, and fast cooling procedure were applied to these cavities. In this study, obtained results will be compared with the baseline measurement for the standard recipe at KEK.  
poster icon Poster MOPCAV006 [1.876 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-MOPCAV006  
About • Received ※ 22 June 2021 — Revised ※ 14 January 2022 — Accepted ※ 22 February 2022 — Issue date ※ 28 February 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPFAV003 Stable Beam Operation at 33 MV/m in STF-2 Cryomodules at KEK 382
 
  • Y. Yamamoto, M. Akemoto, D.A. Arakawa, A. Araki, S. Araki, A. Aryshev, T. Dohmae, M. Egi, M.K. Fukuda, K. Hara, H. Hayano, Y. Honda, T. Honma, H. Ito, E. Kako, H. Katagiri, R. Katayama, M. Kawamura, N. Kimura, Y. Kojima, Y. Kondou, T. Konomi, M. Masuzawa, T. Matsumoto, S. Michizono, Y. Morikawa, H. Nakai, H. Nakajima, K. Nakanishi, M. Omet, T. Oyama, T. Saeki, H. Sakai, H. Shimizu, S.I. Takahara, R. Ueki, K. Umemori, A. Yamamoto
    KEK, Ibaraki, Japan
  • S. Aramoto
    Hiroshima University, Higashi-Hiroshima, Japan
  • M. Kuriki
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  • Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • K. Sakaue
    The University of Tokyo, The School of Engineering, Tokyo, Japan
  • A. Yamamoto
    CERN, Meyrin, Switzerland
 
  In STF at KEK, as the operational demonstration of the SRF accelerator for ILC, the STF-2 cryomodules (CM1+CM2a: one and half size CM with 12 cavities) have achieved 33 MV/m as average accelerating gradient with 7 cavities in Mar/2019. After that, one cavity with the lowest performance installed in CM2a was replaced with one N-infused cavity developed for High-Q/High-G R&D between Japan and US. From this April, the beam operation started again and those CMs achieved 33 MV/m as average accelerating gradient with 9 cavities including one N-infused cavity again. This is the very important milestone for ILC. In this report, the detailed results will be presented.  
poster icon Poster TUPFAV003 [3.015 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-TUPFAV003  
About • Received ※ 21 June 2021 — Revised ※ 11 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 01 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THOTEV01
Overview on Worldwide Development of SRF-Gun Cavities  
 
  • T. Konomi
    KEK, Ibaraki, Japan
 
  This talk is an overview of worldwide development of SRF-gun cavities including the recent activities at KEK, BNL, FNAL, HZB, HZDR and other laboratories. SRF electron guns have a possibility to realize high acceleration voltage and high beam repetition simultaneously in many accelerator applications. The design, fabrication, surface treatments and VT results of the SRF-gun cavities in each laboratory should be summarized. The cryomodule design with a low particulate cathode insertion system and the latest results in full cryostats should be presented.  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THOTEV02 Stable Beam Operation in cERL for Medical and Industrial Application at KEK 714
 
  • H. Sakai, M. Adachi, D.A. Arakawa, S. Eguchi, M.K. Fukuda, K. Haga, M. Hagiwara, K. Hara, K. Harada, N. Higashi, T. Honda, Y. Honda, T. Honma, M. Hosumi, E. Kako, Y. Kamiya, R. Kato, H. Kawata, Y. Kobayashi, Y. Kojima, T. Konomi, H. Matsumura, S. Michizono, C. Mitsuda, T. Miura, T. Miura, T. Miyajima, Y. Morikawa, S. Nagahashi, H. Nakai, N. Nakamura, K. Nakanishi, K.N. Nigorikawa, T. Nogami, T. Obina, F. Qiu, H. Sagehashi, M. Shimada, H. Shimizu, T. Shioya, M. Tadano, T. Takahashi, R. Takai, H. Takaki, O.A. Tanaka, Y. Tanimoto, A. Toyoda, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, M. Yamamoto
    KEK, Ibaraki, Japan
  • R. Hajima, K. Kawase
    QST, Tokai, Japan
  • N.P. Norvell
    SLAC, Menlo Park, California, USA
  • F. Sakamoto
    Akita National College of Technology, Akita, Japan
  • M. Shimada
    HSRC, Higashi-Hiroshima, Japan
 
  Funding: Supported by Accelerator Inc. and a New Energy and Industrial Technology Development Organization (NEDO) project and JSPS Grant-in-Aid for Scientific Research (KAKENHI) Grant Number JP18H03473.
A superconducting Compact Energy Recovery Linac (cERL) for electrons was constructed in 2013 at KEK to demonstrate energy recovery concept with low emittance, high-current CW beams of more than 10 mA for future multi-GeV ERL. Recently this cERL was operated not only to demonstrate energy recovery linac high current beam operation but also to promote and conduct a variety of industrial applications such as FEL, THz operation and Rare Isotope Production and irradiation for some materials. In this talk, I will present the status of the studies to realize the stable high-current low emittance CW beam and some applications with this beam.
 
video icon
        Right click on video for
Picture-in-Picture mode
or Full screen display.

At start the sound is muted!
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THOTEV02  
About • Received ※ 19 June 2021 — Revised ※ 13 March 2022 — Accepted ※ 13 May 2022 — Issue date ※ 15 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)