Author: Kubo, T.
Paper Title Page
TUPFDV008 Instrumentation R&D for the Studies of SRF Thin-Film Structures at KEK and Kyoto University 421
 
  • Y. Fuwa
    JAEA/J-PARC, Tokai-mura, Japan
  • H. Hayano, H. Ito, R. Katayama, T. Kubo, T. Saeki
    KEK, Ibaraki, Japan
  • Y. Iwashita, Y. Kuriyama
    Kyoto University, Research Reactor Institute, Osaka, Japan
  • H. Tongu
    Kyoto ICR, Uji, Kyoto, Japan
 
  We have been developing SRF instrumentations by which the effective lower critical magnetic field Hc1,eff of superconducting-material sample is evaluated through the method of the third-order harmonic voltage measurement mainly for the studies of new SRF thin-film structures. Recently, the quad coil system, which enables us to measure four samples simultaneously in a single batch of an experiment, has been developed. In order to study the creation of thin-film structures inside the SRF cavity, we developed 3-GHz-shaped coupon cavities and an XT-map system for the performance tests of 3 GHz cavities. This article reports the details of these works.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-TUPFDV008  
About • Received ※ 01 July 2021 — Revised ※ 19 December 2021 — Accepted ※ 02 April 2022 — Issue date ※ 02 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPCAV001 Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results 431
 
  • F. Éozénou, M. Baudrier, E. Cenni, E. Fayette, L. Maurice, C. Servouin
    CEA-DRF-IRFU, France
  • V. Chouhan, Y.I. Ida, K.N. Nii, T.Y. Yamaguchi
    MGH, Hyogo-ken, Japan
  • H. Hayano, H. Ito, S. Kato, T. Kubo, H. Monjushiro, T. Saeki
    KEK, Ibaraki, Japan
  • G. Jullien
    CEA-IRFU, Gif-sur-Yvette, France
 
  Vertical Electro-Polishing (VEP) of elliptical cavities using rotating Ninja cathodes (Marui Company patented technology) has continually been improved since 2012 and successfully applied for 1300MHz multicell ILC-type resonators. The goal of the presented study is to apply this technology to 704 MHz ESS-type resonators with both better Q0 and accelerating gradients in mind. We intend to demonstrate the superiority of VEP compared to standard Buffer Chemical Polishing (BCP), for possible applications such as MYRRHA accelerator. We describe here the promising results achieved on β=0.86 single-cell cavity after 200 µm uniform removal. The cavity quenched at 27 MV/m without any heat treatment. The surface resistance achieved was less than 5nΩ at 1.8K. Substantial performance improvement is expected after heat treatment of the cavity and additional 20 µm VEP sequence. A cathode for 5-Cell ESS cavity is concomitantly under design stage.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-TUPCAV001  
About • Received ※ 21 June 2021 — Revised ※ 16 August 2021 — Accepted ※ 23 August 2021 — Issue date ※ 17 March 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)