Author: Neumann, A.
Paper Title Page
MOPTEV007 RF Conditioning of 120 kW CW 1.3 GHz High Power Couplers for the bERLinPro Energy Recovery Linac 216
 
  • A. Neumann, W. Anders, A. Frahm, F. Göbel, A. Heugel, S. Klauke, J. Knobloch, M. Schuster, Y. Tamashevich
    HZB, Berlin, Germany
 
  Funding: The work is funded by the Helmholtz-Association, BMBF, the state of Berlin and HZB.
This year, the commissioning of the 50 MeV, 100 mA bERLinPro Energy Recovery Linac test facility [1] will resume. For the Booster cryo-module of the injector line, operated with three modified 1.3 GHz Cornell style 2-cell SRF cavities, a new type of power coupler was developed, based on KEK’s C-ERL injector coupler. Modifications were made for a stronger coupling and lower emittance diluting coupler tip variant, a so-called "Golf Tee" shape and the cooling concept was redesigned based on KEK’s first experiences. For the final stage, the injector needs to deliver a low emittance beam of 100 mA average beam current at 6.5 MeV. That results in a traveling and continuous wave forward power requirement of up to 120 kW each of the twin setup feeding one Booster cavity. In this contribution we will give a short overview of the RF design and its impact on the beam’s emittance, give an overview of the conditioning teststand and the results achieved with the first pairs of couplers.
[1] M. Abo-Bakr et al., in Proc. 9th Int. Particle Accelerator Conf. (IPAC’18), Vancouver, BC, Canada, Apr. 4,, pp. 4127-4130, doi:10.18429/JACoW-IPAC2018-THPMF034
 
poster icon Poster MOPTEV007 [2.461 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-MOPTEV007  
About • Received ※ 19 June 2021 — Accepted ※ 19 August 2021 — Issue date; ※ 17 January 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPTEV003 A Superconducting Magnetic Shield for SRF Modules with Strong Magnetic Field Sources 637
 
  • J. Völker, A. Frahm, S. Keckert, J. Knobloch, A.N. Matveenko, A. Neumann, H. Plötz, Y. Tamashevich
    HZB, Berlin, Germany
  • J. Knobloch
    University of Siegen, Siegen, Germany
 
  Frequently SRF modules require strong focusing magnets close to SRF cavities. The shielding of those magnetic fields to avoid flux trapping, for example during a quench, is a challenge. At HZB, the bERLinPro photo-injector module includes a 1.4 cell SRF cavity placed in close proximity to a superconducting (SC) focusing solenoid. At full solenoid operation, parts of the double mu-metal shield are expected to saturate. To prevent saturation, we developed a new superconducting Meissner-Shield. Several tests of different designs were performed both in the injector module and in the HoBiCaT test facility. The measured results of the final design show a significant shielding that are in good agreement with calculations. Based on these results, a reduction of the magnetic flux density in the mu-metal shields of almost one order of magnitude is expected The design has now been incorporated in the injector module. In this paper we will present the design, the setup and results of the final testing of the superconducting shield.  
poster icon Poster WEPTEV003 [1.854 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-WEPTEV003  
About • Received ※ 21 June 2021 — Revised ※ 16 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 15 March 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEOCAV07
Damage Recovery for SRF Photoinjector Cavities  
 
  • Y. Tamashevich, A. Frahm, F. Göbel, S. Heling, A. Hellwig, K. Janke, S. Klauke, J. Knobloch, A.N. Matveenko, A. Neumann, H. Plötz, A.L. Prudnikava, S. Rotterdam, M. Schuster, J. Ullrich
    HZB, Berlin, Germany
 
  Two niobium elliptical 1.3 GHz SRF electron photoinjector cavities were successfully recovered after mechanical inner surface damage. Both injector cavities had deep imprints in critical high surface electric field area around the photoelectric cathode position. The repairing procedure, consisting of surface inspection, mechanical polishing and light chemical etching is described in detail. Subsequent cold RF tests demonstrate complete performance recovery.  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THOTEV07 Industrial X-Ray Tomographie as a Tool for Shape and Integrity Control of SRF Cavities 725
 
  • H.-W. Glock, J. Knobloch, A. Neumann, A.V. Vélez
    HZB, Berlin, Germany
 
  Industrial X-ray tomography offers the possibility to capture the entire inner and outer shape of an SRF cavity, providing also insights in weld quality and material defects. As a non-contact method this is especially attractive to investigate shape properties of fully processed and closed cavities. A drawback is the inherently strong X-ray damping of niobium, which causes the demand for intense hard X-rays, typically beyond the capabilities of dc-X-ray-tubes. This also limits the accuracy of material borders found by the tomographic inversion. To illustrate both capabilities and limitations, results of X-ray tomography investigations using three different cavities are reported, also describing the fundamental parameters and the hard- and software demands of the technology. We also discuss the non-trivial transferring of tomography data into RF simulation tools.  
video icon
        Right click on video for
Picture-in-Picture mode
or Full screen display.

At start the sound is muted!
 
slides icon Slides THOTEV07 [9.574 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THOTEV07  
About • Received ※ 30 June 2021 — Revised ※ 03 January 2022 — Accepted ※ 03 March 2022 — Issue date ※ 08 April 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)