Author: Sakai, H.
Paper Title Page
SUPCAV008 Design and Construction of Nb3Sn Vapor Diffusion Coating System at KEK 23
  • K. Takahashi, T. Okada
    Sokendai, Ibaraki, Japan
  • H. Ito, E. Kako, T. Konomi, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
  Vapor diffusion Nb3Sn coating system was developed at KEK. At most 1.3GHz 3-cell cavity can be coat with the coating system. The coating system consists of a coating chamber made of Nb, a vacuum furnace for heating the Nb chamber, and a heating device of Tin in the crucible. The Nb chamber vacuum and the furnace vacuum are isolated to prevent contamination from the furnace. There is a heating device for increasing Tin vapor pressure. In this presentation, the design and construction of the coating system are reported.  
poster icon Poster SUPCAV008 [0.981 MB]  
DOI • reference for this paper ※  
About • Received ※ 21 June 2021 — Accepted ※ 18 November 2021 — Issue date; ※ 11 April 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
SUPCAV009 First Nb3Sn Coating and Cavity Performance Result at KEK 27
  • K. Takahashi, T. Okada
    Sokendai, Ibaraki, Japan
  • H. Ito, E. Kako, T. Konomi, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
  At KEK, Nb3Sn vapor diffusion R&D for High-Q has just started. We have performed Nb3Sn coating on niobium samples and characterized these samples. We optimized the cavity coating parameter from the result of characterized samples. After optimizing the parameter, we have performed Nb3Sn coating on a TESLA-like single-cell Nb cavity and measured cavity performance in vertical tests. This presentation presents the result of the cavity coating and performance results.  
poster icon Poster SUPCAV009 [1.477 MB]  
DOI • reference for this paper ※  
About • Received ※ 21 June 2021 — Accepted ※ 18 March 2022 — Issue date; ※ 16 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
MOPCAV015 Development of QWRS for the Future Upgrade of JAEA Tandem Superconducting Booster 299
  • Y. Kondo, H. Kabumoto, M. Matsuda
    JAEA, Ibaraki-ken, Japan
  • T. Dohmae, E. Kako, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
  • H. Harada, J. Kamiya, K. Moriya, J. Tamura
    JAEA/J-PARC, Tokai-mura, Japan
  The Japan Atomic Energy Agency (JAEA) tandem booster is one of the pioneering superconducting heavy ion linac in the world. It consists of 40 QWRs with an operation frequency of 130 MHz and βopt=0.1, and has potential to accelerate various ions up to Au to 10 MeV/u. The user operation was started in 1994, however, it has been suspended since the Great East Japan Earthquake in 2011. Recently, we started activities to investigate and improve the performance of the QWR cavities towards the restart of the tandem booster. In addition, design work of new lower beta cavities to improve the acceleration efficiency of heavier ions such as Uranium has been launched. Now we are surveying some operation frequencies and types of cavities including multi-gap QWR with use of electro-magnetic simulation of the cavities. In this work, the current status of the R&D program for the JAEA tandem facility is presented.  
DOI • reference for this paper ※  
About • Received ※ 20 June 2021 — Accepted ※ 21 August 2021 — Issue date; ※ 01 October 2021  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
Observation of Precise Distribution of Trapped Magnetic Flux Due to Quench by M&T Mapping System  
  • T. Okada
    Sokendai, Ibaraki, Japan
  • E. Kako, M. Masuzawa, H. Sakai, R. Ueki, K. Umemori
    KEK, Ibaraki, Japan
  • P. Pizzol, A. Poudel, T. Tajima
    LANL, Los Alamos, New Mexico, USA
  This study focused on the flux trapping of the superconducting cavity by measuring changes in the spatial magnetic field distribution for the Nb single-cell cavity using the magnetic field and temperature mapping system. The different external magnetic fields were applied when the cavity was vertically tested. The differences of magnetic field distribution were compared before and after flux trapping caused by quenches. The magnetic field mapping measured the magnetic field, including 3 axial directions, outside the equator of the cavity. Moreover, the local heating generated by the magnetic flux trapping was observed locally using temperature mapping. The result shows that the changes in the magnetic field distribution have the magnetic field components towards the quench location. In this presentation, the detail of experiments and results of the change of the magnetic field distribution and the local heating will be presented.  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
TUPFAV003 Stable Beam Operation at 33 MV/m in STF-2 Cryomodules at KEK 382
  • Y. Yamamoto, M. Akemoto, D.A. Arakawa, A. Araki, S. Araki, A. Aryshev, T. Dohmae, M. Egi, M.K. Fukuda, K. Hara, H. Hayano, Y. Honda, T. Honma, H. Ito, E. Kako, H. Katagiri, R. Katayama, M. Kawamura, N. Kimura, Y. Kojima, Y. Kondou, T. Konomi, M. Masuzawa, T. Matsumoto, S. Michizono, Y. Morikawa, H. Nakai, H. Nakajima, K. Nakanishi, M. Omet, T. Oyama, T. Saeki, H. Sakai, H. Shimizu, S.I. Takahara, R. Ueki, K. Umemori, A. Yamamoto
    KEK, Ibaraki, Japan
  • S. Aramoto
    Hiroshima University, Higashi-Hiroshima, Japan
  • M. Kuriki
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  • Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • K. Sakaue
    The University of Tokyo, The School of Engineering, Tokyo, Japan
  • A. Yamamoto
    CERN, Meyrin, Switzerland
  In STF at KEK, as the operational demonstration of the SRF accelerator for ILC, the STF-2 cryomodules (CM1+CM2a: one and half size CM with 12 cavities) have achieved 33 MV/m as average accelerating gradient with 7 cavities in Mar/2019. After that, one cavity with the lowest performance installed in CM2a was replaced with one N-infused cavity developed for High-Q/High-G R&D between Japan and US. From this April, the beam operation started again and those CMs achieved 33 MV/m as average accelerating gradient with 9 cavities including one N-infused cavity again. This is the very important milestone for ILC. In this report, the detailed results will be presented.  
poster icon Poster TUPFAV003 [3.015 MB]  
DOI • reference for this paper ※  
About • Received ※ 21 June 2021 — Revised ※ 11 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 01 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPTEV013 New Frequency-Tuning System and Digital LLRF for Stable and Reliable Operation of SRILAC 666
  • K. Suda, O. Kamigaito, K. Ozeki, N. Sakamoto, K. Yamada
    RIKEN Nishina Center, Wako, Japan
  • H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa
    MHI-MS, Kobe, Japan
  • E. Kako, H. Nakai, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
  The superconducting booster linac at RIKEN (SRILAC) has ten 73-MHz quarter-wavelength resonators (QWRs) that are contained in three cryomodules. The beam commissioning of SRILAC was successfully performed in January 2020. Frequency tuning during cold operation is performed by compressing the beam port of the cavity with stainless wires and decreasing the length of each beam gap, similar to the method adopted at ANL and FRIB. However, each tuner is driven by a motor connected to gears, instead of using gas pressure. Since the intervals of the QWRs are small due to the beam dynamics, a compact design for the tuner was adopted. Each cavity was tuned to the design frequency, which required frequency changes of 3 kHz to 7 kHz depending on the cavity. Although no piezoelectric actuator is mounted on the tuning system, phase noise caused by microphonics can be sufficiently reduced by a phase-locked loop using a newly developed digital LLRF. The details of the tuning system as well as the digital LLRF will be presented.  
DOI • reference for this paper ※  
About • Received ※ 13 August 2021 — Revised ※ 13 September 2021 — Accepted ※ 11 November 2021 — Issue date ※ 22 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
THOTEV02 Stable Beam Operation in cERL for Medical and Industrial Application at KEK 714
  • H. Sakai, M. Adachi, D.A. Arakawa, S. Eguchi, M.K. Fukuda, K. Haga, M. Hagiwara, K. Hara, K. Harada, N. Higashi, T. Honda, Y. Honda, T. Honma, M. Hosumi, E. Kako, Y. Kamiya, R. Kato, H. Kawata, Y. Kobayashi, Y. Kojima, T. Konomi, H. Matsumura, S. Michizono, C. Mitsuda, T. Miura, T. Miura, T. Miyajima, Y. Morikawa, S. Nagahashi, H. Nakai, N. Nakamura, K. Nakanishi, K.N. Nigorikawa, T. Nogami, T. Obina, F. Qiu, H. Sagehashi, M. Shimada, H. Shimizu, T. Shioya, M. Tadano, T. Takahashi, R. Takai, H. Takaki, O.A. Tanaka, Y. Tanimoto, A. Toyoda, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, M. Yamamoto
    KEK, Ibaraki, Japan
  • R. Hajima, K. Kawase
    QST, Tokai, Japan
  • N.P. Norvell
    SLAC, Menlo Park, California, USA
  • F. Sakamoto
    Akita National College of Technology, Akita, Japan
  • M. Shimada
    HSRC, Higashi-Hiroshima, Japan
  Funding: Supported by Accelerator Inc. and a New Energy and Industrial Technology Development Organization (NEDO) project and JSPS Grant-in-Aid for Scientific Research (KAKENHI) Grant Number JP18H03473.
A superconducting Compact Energy Recovery Linac (cERL) for electrons was constructed in 2013 at KEK to demonstrate energy recovery concept with low emittance, high-current CW beams of more than 10 mA for future multi-GeV ERL. Recently this cERL was operated not only to demonstrate energy recovery linac high current beam operation but also to promote and conduct a variety of industrial applications such as FEL, THz operation and Rare Isotope Production and irradiation for some materials. In this talk, I will present the status of the studies to realize the stable high-current low emittance CW beam and some applications with this beam.
video icon
        Right click on video for
Picture-in-Picture mode
or Full screen display.

At start the sound is muted!
DOI • reference for this paper ※  
About • Received ※ 19 June 2021 — Revised ※ 13 March 2022 — Accepted ※ 13 May 2022 — Issue date ※ 15 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)