Author: Senevirathne, I.H.
Paper Title Page
SUPTEV016 Samples for 3rd Harmonic Magnetometry Assessment of NbTiN-Based SIS Structures 164
 
  • D.R. Beverstock, J.R. Delayen, I.H. Senevirathne, J.K. Spradlin, A-M. Valente-Feliciano
    JLab, Newport News, Virginia, USA
  • C.Z. Antoine
    CEA-IRFU, Gif-sur-Yvette, France
  • J.R. Delayen, I.H. Senevirathne
    ODU, Norfolk, Virginia, USA
  • D. Manos
    The College of William and Mary, Williamsburg, Virginia, USA
 
  Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. NSF Grants PHY-1734075 and PHY-1416051, and DOE Awards DE-SC0010081 and DE-SC0019399.
In the quest for alternative superconducting materials to bring accelerator cavity performance beyond the bulk niobium (Nb) intrinsic limits, a promising concept uses superconductor-insulator-superconductor (SIS) thin film structures that allows magnetic flux shielding in accelerator cavities to higher fields [1]. Candidate materials for such structures are NbTiN as the superconductor and AlN as the insulator. We have demonstrated high quality NbTiN and AlN deposited by reactive DC magnetron sputtering (DCMS), both for individual layers and multilayers. Interface quality has been assessed for bilayer stacks with 250 nm NbTiN layers and AlN thicknesses from 30 nm down to1 nm. These SIS structures show continued sharp interfaces with total average roughness under 2 nm. The Hfp enhancement of the films will be examined with a 3rd harmonic magnetometry. The system is being designed and built in a continuing collaboration with CEA Saclay. It can measure 25 to 50 mm samples on a temperature controlled stage. This contribution presents an overview of the design of the 3rd harmonic magnetometer and the material properties assessment of standalone films and multilayer nanostructures.
[1] A. Gurevich, Applied Physics Letters, vol. 88, p. 012511, 2006.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPTEV016  
About • Received ※ 22 June 2021 — Accepted ※ 10 November 2021 — Issue date; ※ 16 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
SUPTEV001 Magnetic Field Penetration Technique to Study High Field Shielding of Multilayered Superconductors 112
 
  • I.H. Senevirathne, J.R. Delayen, A.V. Gurevich
    ODU, Norfolk, Virginia, USA
  • J.R. Delayen, A-M. Valente-Feliciano
    JLab, Newport News, Virginia, USA
 
  Funding: NSF Grants PHY-1734075 and PHY-1416051, and DOE Awards DE-SC0010081 and DE-SC0019399
The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer super-conductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T and Hall probes to detect penetrated magnetic field across the superconducting sample. This system was calibrated and used to study the effect of niobium sample thickness on the field of full magnetic flux penetration. We determined the optimum thickness of the niobium substrate to fabricate the multilayer structure for the measurements in our setup. This technique was used to measure penetration fields of Nb3Sn thin films and Nb3Sn/Al2O3 multi-layers deposited on Al2O3 wafers.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPTEV001  
About • Received ※ 22 June 2021 — Revised ※ 15 August 2021 — Accepted ※ 20 September 2021 — Issue date ※ 28 April 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)