Author: Weise, H.
Paper Title Page
SUPFDV001 Update on Nitrogen Infusion Sample R&D at DESY 57
 
  • C. Bate, A. Dangwal Pandey, A. Ermakov, B. Foster, T.F. Keller, D. Reschke, J. Schaffran, S. Sievers, H. Weise, M. Wenskat
    DESY, Hamburg, Germany
  • B. Foster
    Oxford University, Physics Department, Oxford, Oxon, United Kingdom
  • W. Hillert, M. Wenskat
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  Many accelerator projects such as the European XFEL cw upgrade or the ILC, would benefit from cavities with reduced surface resistance (high Q-values) while maintaining a high accelerating gradient. A possible way to meet the requirements is the so-called nitrogen-infusion procedure on Niobium cavities. However, a fundamental understanding and a theoretical model of this method are still missing. The approach shown here is based on R\&D using small samples, with the goal of identifying all key parameters of the process and establishing a stable, reproducible recipe. To understand the underlying processes of the surface evolution that give improved cavity performance, advanced surface-analysis techniques (e.g. SEM/EDX, TEM, XPS, TOF-SIMS) are utilized and several kinds of samples are analyzed. Furthermore, parameters such as RRR and the surface critical magnetic field denoted as Hc3 have been investigated. For this purpose, a small furnace dedicated to sample treatment was set up to change and explore the parameter space of the infusion recipe. Results of these analyses and their implications for the R\&D on cavities are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPFDV001  
About • Received ※ 22 June 2021 — Accepted ※ 03 January 2022 — Issue date; ※ 27 April 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUOFDV03 Vacancy-Hydrogen Dynamics and Magnetic Impurities During Mid-T Bake 342
 
  • M. Wenskat, C. Bate, D. Reschke, J. Schaffran, L. Steder, H. Weise
    DESY, Hamburg, Germany
  • C. Bate, G.D.L. Semione, A. Stierle
    University of Hamburg, Hamburg, Germany
  • M. Butterling, E. Hirschmann, M.O. Liedke, A. Wagner
    HZDR, Dresden, Germany
  • J. Cizek
    Charles University, Prague, Czech Republic
  • W. Hillert
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  Positron annihilation measurements allow to study the hydrogen interaction with vacancies in a crystal lattice. Furthermore, the 3/2 ratio of the positronium annihilation can be used to identify local magnetic impurities in thin layers. Dynamic studies of these properties in annealing studies up to 300°C will be presented. The discussion is accompanied by X-ray reflectivity studies performed on single crystal samples to study the niobium oxide dissolution. The dynamics of magnetic impurities during a Mid-T bake will be presented, put into the context of cavity studies and a potential link to rf properties will be discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-TUOFDV03  
About • Received ※ 23 June 2021 — Revised ※ 12 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 05 December 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTEV011 SRF Accelerating Modules Repair at DESY 508
 
  • D. Kostin, J. Eschke, K. Jensch, N. Krupka, L. Lilje, A. Muhs, D. Reschke, S. Saegebarth, J. Schaffran, M. Schalwat, P. Schilling, M. Schmökel, S. Sievers, N. Steinhau-Kühl, E. Vogel, H. Weise, M. Wiencek, B. van der Horst
    DESY, Hamburg, Germany
 
  Eight SRF cavities assembled in an accelerating module represent a building block of the particle linear accelerator based on TESLA SRF technology. DESY has two machines, European XFEL and FLASH. Both use almost same module and cavity types. During the module assembly many factors can deteriorate the cavity performance and cause a need for a repair action. Currently two European XFEL modules and two FLASH ones underwent reassembly procedures. The repair was not immediately successful on every of these modules and re-iterations did follow. The degradation causes were investigated. SRF modules were tested on both test-stands at DESY: AMTF and CMTB. The results of the described actions are presented and discussed.  
poster icon Poster TUPTEV011 [1.494 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-TUPTEV011  
About • Received ※ 18 June 2021 — Accepted ※ 19 November 2021 — Issue date; ※ 01 February 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)