Keyword: detector
Paper Title Other Keywords Page
MOPTEV010 RF System Experience for FRIB Half Wave Resonators controls, cavity, MMI, linac 226
 
  • S. Zhao, W. Chang, E. Daykin, E. Gutierrez, S.H. Kim, S.R. Kunjir, T.L. Larter, D.G. Morris, J.T. Popielarski
    FRIB, East Lansing, Michigan, USA
 
  Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661.
The installation and commissioning of the FRIB superconducting linac adopts a phased strategy. In SRF’19 we reported the progress on the commissioning of the linear segment 1 (LS1) which contains mainly the quarter wave resonators (QWRs). In this paper, we will report the recent progress on the commissioning of the remainder of the linac, including linear segment 2 (LS2), folding segment 2 (FS2) and linear segment 3 (LS3), focusing on the RF system experience for the half wave resonators (HWRs). Compared to the QWRs, the HWRs have a different type of tuner, run at higher power levels and have additional components (for example, high voltage bias tee for multipacting suppression and spark detector). Topics such as nonlinear tuner control for the pneumatic tuners; auto turn on/off implementation; and early issues and failures will be discussed in more detail.
 
poster icon Poster MOPTEV010 [1.599 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-MOPTEV010  
About • Received ※ 22 June 2021 — Revised ※ 22 August 2021 — Accepted ※ 16 November 2021 — Issue date ※ 22 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPTEV002 High Power Coupler Devepment for EIC multipactoring, SRF, cavity, simulation 632
 
  • W. Xu, Z.A. Conway, J.M. Fite, D. Holmes, K.S. Smith, A. Zaltsman
    BNL, Upton, New York, USA
 
  Funding: This work is supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
The future EIC Electron storage ring at BNL needs to compensate up to 10 MW synchrotron loss with RF systems. The RF system relies on 34 fundamental power couplers to deliver RF power from power sources at room temperature to 17 SRF cavities at 2 K. Each power coupler will operate with 400 kW forward power, with full reflection for ~10% of time. We are developing two 1 MW coaxial FPCs at BNL, one with a BeO window and the other with an Al2O3 window. This paper will briefly summarize test results of high power test on the BeO window FPC , and then describe the development status of the Al2O3 window FPC.
 
poster icon Poster WEPTEV002 [3.393 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-WEPTEV002  
About • Received ※ 25 June 2021 — Revised ※ 28 January 2022 — Accepted ※ 05 April 2022 — Issue date ※ 12 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPTEV016 Field Emission Studies During ESS Cryomodule Tests at CEA Saclay cavity, cryomodule, electron, simulation 677
 
  • E. Cenni
    CEA-IRFU, Gif-sur-Yvette, France
  • M. Baudrier, G. Devanz, L. Maurice, O. Piquet
    CEA-DRF-IRFU, France
 
  For the development of efficient superconducting cavi-ties, field emission is an important parasitic phenomena to monitor. A diagnostic system composed of Geiger-Mueller (G-M) probes, NaI(Tl) scintillators are placed in the cryomodule test stand. Collected data is analysed and confronted to particle tracking simulation and electro magnetic shower code. With such systematic analysis we aim to identify the most probable field emission location and hence help to improve clean procedures during as-sembly and operation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-WEPTEV016  
About • Received ※ 21 June 2021 — Revised ※ 22 September 2021 — Accepted ※ 18 December 2021 — Issue date ※ 17 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THOTEV07 Industrial X-Ray Tomographie as a Tool for Shape and Integrity Control of SRF Cavities cavity, photon, electron, radiation 725
 
  • H.-W. Glock, J. Knobloch, A. Neumann, A.V. Vélez
    HZB, Berlin, Germany
 
  Industrial X-ray tomography offers the possibility to capture the entire inner and outer shape of an SRF cavity, providing also insights in weld quality and material defects. As a non-contact method this is especially attractive to investigate shape properties of fully processed and closed cavities. A drawback is the inherently strong X-ray damping of niobium, which causes the demand for intense hard X-rays, typically beyond the capabilities of dc-X-ray-tubes. This also limits the accuracy of material borders found by the tomographic inversion. To illustrate both capabilities and limitations, results of X-ray tomography investigations using three different cavities are reported, also describing the fundamental parameters and the hard- and software demands of the technology. We also discuss the non-trivial transferring of tomography data into RF simulation tools.  
video icon
        Right click on video for
Picture-in-Picture mode
or Full screen display.

At start the sound is muted!
 
slides icon Slides THOTEV07 [9.574 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-THOTEV07  
About • Received ※ 30 June 2021 — Revised ※ 03 January 2022 — Accepted ※ 03 March 2022 — Issue date ※ 08 April 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)