Keyword: pick-up
Paper Title Other Keywords Page
SUPFDV016 A Low Power Test Facility for SRF Thin Film Testing with High Sample Throughput Rate cavity, SRF, niobium, controls 100
 
  • D.J. Seal
    Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
  • G. Burt, P. Goudket, O.B. Malyshev, B.S. Sian, R. Valizadeh
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • G. Burt, B.S. Sian
    Lancaster University, Lancaster, United Kingdom
  • J.A. Conlon, P. Goudket, O.B. Malyshev, R. Valizadeh
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
 
  A low-power SRF test facility is being upgraded at Daresbury Laboratory as part of the superconducting thin film testing programme. The facility consists of a bulk niobium test cavity operating at 7.8 GHz, surrounded by RF chokes, and can be run with input RF powers up to 1 W. It is housed within a liquid helium free cryostat and is able to test thin film planar samples up to 100 mm in diameter with a thickness between 1 and 20 mm. The RF chokes allow the cavity to be physically and thermally isolated from the sample, thus reducing the need for complicated sample mounting, whilst minimising field leakage out of the cavity. This allows for a fast turnaround time of two to three days per sample. Initial tests using a newly designed sample holder have shown that an RF-DC compensation method can be used successfully to calculate the surface resistance of samples down to 4 K. Potential upgrades include a pick-up antenna for direct measurements of stored energy and the addition of a self-excited loop to mitigate the effects of microphonics. Details of this facility and preliminary results are described in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPFDV016  
About • Received ※ 21 June 2021 — Accepted ※ 12 August 2021 — Issue date; ※ 18 December 2021  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
SUPFDV018 CERN Based Tc Measurement Station for Thin-Film Coated Copper Samples and Results on Related Studies niobium, cavity, SRF, site 105
 
  • D. Fonnesu, J. Bremer, T. Koettig, L. Laín-Amador, C. Pereira Carlos, G.J. Rosaz, A.P.O. Vaaranta
    CERN, Meyrin, Switzerland
 
  Funding: EASITrain - European Advanced Superconductivity Innovation and Training. This MSCA ITN has received funding from the European Union’s H2020 Framework Programme under GA no. 764879.
In the framework of The Future Circular Collider (FCC) Study, the development of thin-film coated superconducting radio-frequency (SRF) cavities capable of providing higher accelerating fields (10 to 20 MV/m against 5 MV/m of LHC) represents a major challenge. In this work, we present the development of a test stand commissioned at CERN for the inductive measurement of the critical temperature (Tc) of SC thin-film deposited on copper samples for SRF applications. Based on new studies for the production of Non Evaporable Getters (NEG) coated chambers [1], we also present the first results of an alternative forming method for seamless copper cavities with niobium layer integrated in the production process.
[1] doi:10.1116/1.4999539
 
poster icon Poster SUPFDV018 [1.611 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-SUPFDV018  
About • Received ※ 21 June 2021 — Revised ※ 09 July 2021 — Accepted ※ 12 August 2021 — Issue date ※ 01 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPFAV002 Calibration of SRF Cavity Voltage by Measurement of Synchrotron Frequency in SuperKEKB cavity, factory, operation, SRF 376
 
  • M. Nishiwaki, K. Akai, T. Furuya, T. Kobayashi, S. Mitsunobu, Y. Morita, T. Okada
    KEK, Ibaraki, Japan
 
  Eight SRF cavity modules, which have been operated in KEKB for more than ten years, are stably operating also in SuperKEKB. As for calibration of the cavity voltage Vc, non-negligible discrepancy was observed between the results obtained from two different methods: one is using external Q value (Qext) of pickup ports, and the other is using loaded Q value (QL) of the cavities. The discrepancy comes from inaccuracy of power measurement in high power RF system and uncertainty of the Qext or QL values. In order to solve the discrepancy by improving the accuracy of the calibration for each individual cavity, we investigated a method by measuring synchrotron frequency fs of stored beam. With this method, Vc calibration can be performed without affected by inaccuracy of high-power measurement or uncertainty of the Qext or QL values. The fs measurement studies were carried out in SuperKEKB. With these studies, Vc calibration was obtained with a high accuracy of about 1%. The results are applied to the SuperKEKB operation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2021-TUPFAV002  
About • Received ※ 21 June 2021 — Revised ※ 13 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 14 October 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)