Keyword: synchrotron
Paper Title Other Keywords Page
SUPCAV011 Third Harmonic Superconductive Cavity for Bunch Lengthening and Beam Lifetime Increase of Sirius Synchrotron Light Source cavity, impedance, electron, beam-loading 37
  • I. Carvalho de Almeida, M. Hoffmann Wallner, A. Pontes Barbosa Lima
    CNPEM, Campinas, SP, Brazil
  A passive third harmonic superconducting cavity is to be installed at Sirius’ 4th generation synchrotron light source in order to lengthen the bunches and improve beam lifetime, which is dominated by Touschek scattering. A study of optimal bunch lengthening is carried on by enforcing a flat potential well around the synchronous electron and the results are compared to the passive operation case for several shunt impedances and unloaded quality factors based on known operating cavities. To determine the new bunch shape due to beam loading and its length, a full consistent approach is followed by setting the harmonic voltage amplitude equal to the optimum value and calculating the required detune, harmonic phase and synchronous phase for an initial complex form factor, allowing the new distribution to be obtained by an iterative process. For each case analyzed, energy acceptance is obtained through the separatrix in the phase plane and the corresponding lifetime increase ratio is calculated. Input power required after the addition of the harmonic cavity is then estimated.  
DOI • reference for this paper ※  
About • Received ※ 20 June 2021 — Accepted ※ 15 November 2021 — Issue date; ※ 21 March 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
MOPTEV006 Synchrotron XPS Study of Niobium Treated with Nitrogen Infusion niobium, vacuum, cavity, experiment 211
  • A.L. Prudnikava, J. Knobloch, O. Kugeler, Y. Tamashevich
    HZB, Berlin, Germany
  • V. Aristov, O. Molodtsova
    DESY, Hamburg, Germany
  • S. Babenkov
    LIDYL, Gif sur Yvette, France
  • A. Makarova
    FUB, Berlin, Germany
  • D. Smirnov
    Technische Universität Dresden, Dresden, Germany
  Processing of niobium cavities with the so-called ni-trogen infusion treatment demonstrates the improve-ment of efficiency and no degradation of maximal accelerating gradients. However, the chemical compo-sition of the niobium surface and especially the role of nitrogen gas in this treatment has been the topic of many debates. While our study of the infused niobium using synchrotron X-ray Photoelectron Spectroscopy (XPS) showed modification of the surface sub-oxides surprisingly there was no evidence of nitrogen con-centration build up during the 120°C baking step, irre-spectively of N2 supply. Noteworthy, that the niobium contamination with carbon and nitrogen took place during a prolonged high-temperature anneal even in a high vacuum condition (10-8-10-9 mbar). Evidently, the amount of such contamination appears to play a key role in the final cavity performance  
DOI • reference for this paper ※  
About • Received ※ 21 June 2021 — Revised ※ 13 July 2021 — Accepted ※ 19 August 2021 — Issue date ※ 05 September 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
TUPFAV006 The Superconducting Radio Frequency System of Shenzhen Industrial Synchrotron Radiation Source FacilityRIAL SYNCHROTRON RADIATION SOURCE FACILITY cavity, radiation, storage-ring, radio-frequency 392
  • W. Ma, Y.B. Sun, N. Yuan
    Sun Yat-sen University, Zhuhai, Guangdong, People’s Republic of China
  • L.G. Liu
    SSRF, Shanghai, People’s Republic of China
  • L. Lu, L. Yang, Z.L. Zhang
    IMP/CAS, Lanzhou, People’s Republic of China
  Shenzhen industrial synchrotron radiation source is a 3 GeV synchrotron radiation diffraction-limited source. It consists of three parts, linear accelerator, booster, and storage ring. As a basic part of the storage ring, the superconducting radio frequency system provides energy for the beam to supplement the beam power loss caused by synchrotron radiation and higher-order modes, and provide the longitudinal bunch for the electron beam. The superconducting radio frequency cavity of the storage ring consists of two 500 MHz single-cell cavities and a third harmonic 1500 MHz double-cell cavity. This paper will introduce the superconducting cavity, radio frequency amplifier, and low-level radio frequency system in the Shenzhen industrial synchrotron radiation source facility.  
DOI • reference for this paper ※  
About • Received ※ 20 June 2021 — Revised ※ 16 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 26 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)