|MOPTEV009||A Method for In-Situ Q0 Measurements of High-Quality SRF Resonators||221|
Funding: The work was supported in the part by DoE SBIR grant #DE-SC0019687.
Accelerator projects such as LCLS-II naturally require low-loss superconducting (SRF) cavities. Due to strong demand for improving intrinsic quality factor (Q0), importance of accurate cavity characterization increases. We propose a method to measure Q0 in situ for an SRF resonator installed in its cryogenic module and connected with a RF feed source via a fixed RF coupler. The method exploits measurements of a response for an SRF resonator fed by an amplitude-modulated signal. Such a signal can be synthesized as a beat-wave composed of two frequencies that are close to the resonant frequency. Analyzing the envelope of the reflected signal, one can find the difference in reflection for the chosen frequencies and use them to compute the intrinsic Q. We also develop the methodology to carry out measurements of Q0 at the nominal cavity operating voltage. We verified our method in experiments with a room temperature copper resonator and with two SRF resonators including Fermilab’s 650 MHz cavity and JLab’s 1500 MHz cavity.
|DOI •||reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPTEV009|
|About •||Received ※ 15 June 2021 — Revised ※ 26 August 2021 — Accepted ※ 19 February 2022 — Issue date ※ 06 April 2022|
|Cite •||reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)|